If you are using 5.0-2472 or newer, you need to either install a filter driver using Zadig or install UsbDk. Do you know if the adapter works in a Nintendo Switch? Link to controller that I bought. It is worth noting that when installing these drivers, when I clicked list all devices on Zadig to look for the adapter, there was no option for WUP-028, but there an option called GameCube for Switch which had the same USB ID of 057E 0337. I just want to make sure I've read this correctly. The GameCube Controller Adapter is not working correctly while connected to the Nintendo Switch dock. (Repost because I failed to include pertinent information last time). Just fixed using Zadig. I actually just found out recently that you can use the PC side of the switch with the adapter and use Standard controller on Dolphin Emulator. I recently bought the IQIKU brand GameCube controller adapter off of Amazon as it was rated highly at an average of 5 stars and was Amazon's choice. The switch on the back of the adapter is switched to Wii U as the PC one does not work. (Doing both is unnecessary, but doesn't lead to any problems.) :/ I tried changing the port, USB socket, the controller I was using, and I even tried updating Dolphin. On Windows, the GameCube controller adapter will need a certain driver to let Dolphin detect it and use it. Hey I know I'm super late to this post but I ordered the same Iqiku adapter and it arrives later today and I'm super excited for it. The site may not work properly if you don't, If you do not update your browser, we suggest you visit, Press J to jump to the feed. First make sure your controller shows up as a gamepad in the windows gamepad settings (type gamepad in the windows search bar). The issue: Dolphin is not recognizing Steam Controller and so SC is not coming up in the controller config section. Please follow the Controller Guide for more info on this: In the description it did say that it was compatible with Dolphin emulator, so I was happy to try it out as I had been wanting to play Super Mario Sunshine on my PC using an original GameCube controller. (Doing both is unnecessary, but doesn't lead to any problems.) I as well as other with the same issue would appreciate your help if possible. Subreddit for the GameCube and Wii emulator Dolphin. Try the section below now; Check if the controller is detected by the host Controller drivers are up-to-date according to Windows (doubtful about this). Press question mark to learn the rest of the keyboard shortcuts. I can't use my GCN Controller on Dolphin. Under the Port 1 dropdown box, click “GameCube Adapter For Wii U”, and then click “Configure.” Note that Port 1 is the first port on the left side of the controller adapter. New comments cannot be posted and votes cannot be cast, More posts from the DolphinEmulator community. Go ahead and select “GameCube Adapter For Wii U.” Note that this will correspond to the port your actual controller is plugged into on the adapter. Hi all, I'm having a problem where though my USB Gamecube controller is plugged into my computer, Dolphin does not detect it in the controller configuration menu; the only option I see is DInput/0/Keyboard Mouse. When I go into a game, the GC controller does not work. I got an adapter made by Dobe (not mayflash or the on-brand wii u adapters, which are supported by dolphin), and have been trying to get this to work on dolphin. My adapter was being detected by Dolphin, so I was excited to get started playing Super Mario Sunshine. (06-27-2016, 09:03 AM) Colossus Wrote: The adapter is detected, because I can assign buttons with the option: "standard controller". Looks like you're using new Reddit on an old browser. Gamecube Controller Adapter Not Being Detected After Game Launch (Common Issue) ... My adapter was being detected by Dolphin, so I was excited to get started playing Super Mario Sunshine. Active 5 years, 4 months ago. Hi all, I'm having a problem where though my USB Gamecube controller is plugged into my computer, Dolphin does not detect it in the controller configuration menu; the only option I see is DInput/0/Keyboard Mouse. Hopefully I don't have to buy another one, but if I can't fix this problem I guess I'll have to. You’ll receive the below window, click Finish. Also, the addition of modern Gyro/Accelerometer control makes the prospect … So I got Mayflash's gamecube to usb adapter a while ago, and when I plug in my controller it doesn't show up anywhere on the computer. The GameCube controller features a total of eight buttons, two analog sticks, a d-pad, and an internal rumble motor. What this does is search the internet for the necessary x360ce Gamecube controller driver (you’re far from the first person to do this!). If it is still undetected, you may have to install/reinstall zadig. I followed all the necessary steps to make it work. If you are using 5.0-2341or older, using Zadig is required. Any idea on what should I do? A quick way to verify that Dolphin recognizes your adapter is to click “Configure” to the right of the dropdown. It didn't work, and I didn't see anything on Dolphin's page that contained the info I need. According to the support page, GameCube controllers are supported, so I was wondering what I was doing wrong? But the issue using the Wii U side and the usual adapter method with Zadig still has the same issue. Check if the controller is properly connected or if drivers are missing; If it does show up, that's good. With this being said, the Wii U USB GCN Adapter might not get detected because you were following the wrong instructions in relation to the driver version that you’re using. You will have to set all the buttons up yourself though, but this way does work 100%. I had the same issue. I've been looking everywhere for a solution to this issue and have seen so many other people struggle just like I have including on this subreddit. GameCube Controller Real GameCube Controller (GameCube Adapter) To use the actual GameCube Controllers using an Official GameCube Controller Adapter for Wii U (and its clones), see How to use the Official GameCube Controller Adapter for Wii U in Dolphin. The characters appear to be drifting or moving on their own while using the GameCube Controller. In the Gamecube Controllers config area, you can configure or disable the emulated GameCube controller ports. 5. Once that was installed, I opened up the latest version of Dolphin emulator and checked the controller options to see if everything had gone smoothly. Reopen Dolphin > Controllers, and for Port 1, make sure Gamecube Wii U Adapter is selected from the drop down. I just got the Mayflash GameCube Controller Adapter and am trying to hook up a GameCube controller to it so I can use netplay. Once I booted up the game, I checked to see if my adapter was still detected, but sadly it was not. Dolphin Emulator / Mayflash GC Controller Adapter Tutorial LINKS: Free 30-day Amazon Prime Trial! Commit 09744db781ab03f9c6427e90ce5b93722d26d066 Change author JosJuice Change description Merge pull request #4881 from leoetlino/libusb Only use usbdk when installed On Windows, the GameCube controller adapter will need a certain driver to let Dolphin detect it and use it. If you get a tiny popup that says “Adapter Detected,” congratulations. I followed the tutorial on Smashladder on how to get the adapter to work and for the most part, I have it working. None of the buttons registered as being pressed. The port assignments in Dolphin correspond to the ones on the adapter. PC not recognizing gamecube controller with mayflash adapter. I've tried all USB ports on my PC, and though Windows itself recognizes the controller Dolphin simply doesn't see it. Press question mark to learn the rest of the keyboard shortcuts. The emulated GameCube controllers themselves are referred to as "Standard Controller" in the dropdown menu. It recognizes the adapter though. Help? I want to run GameCube games on the Dolphin emulator and play with the steam controller. If it doesn't show up, visit the manufacturer website and download drivers or firmware updates for the device. I have tried every possible USB port combination on my computer both with and without the rumble USB connection. (I've tried wireless and then plugging it in) Still no show. Note: After clicking Finish, you may receive another “New Device Detected” window. I've tried all USB ports on my PC, and though Windows itself recognizes the controller Dolphin simply doesn't see it. Open Dolphin > Controllers. https://wiki.dolphin-emu.org/index.php?title=How_to_use_the_Official_GameCube_Controller_Adapter_for_Wii_U_in_Dolphin, New comments cannot be posted and votes cannot be cast, More posts from the DolphinEmulator community. Setting a controller like this up in dolphin is easy. None of my button presses on my GameCube controller were responsive, and if I looked closely in the controller settings, I could see it blinking very fast between not detected and detected. Viewed 3k times 2. Thanks so much to the people on this subreddit for helping others try and fix their existing solutions. Looks like you're using new Reddit on an old browser. If you aren't sure which one to pick, use Zadig. Choose "standard adapter", then choose "configure". I used Zadiq to make sure the drivers were installed correctly and everything seemed to be gonig well so far. Once I booted up the game, I checked to see if my adapter was still detected, but sadly it was not. I hope you have already tried this, but have you tried refreshing it in dolphin? Subreddit for the GameCube and Wii emulator Dolphin. The site may not work properly if you don't, If you do not update your browser, we suggest you visit, Press J to jump to the feed. If you are using 5.0-2341or older, using Zadig is required. If you followed this guide properly, you should see the “Adapter Detected” window. Clicking Configure will determine if the Adapter is connected/detected or not. It does not require any button configuration. If you are using 5.0-2472 or newer, you need to either install a filter driver using Zadig or install UsbDk. I have the original GameCube wii u adapter/gc controllers. I'd like to preface this by saying that this is a big issue I've seen everywhere, and nowhere have I seen a solution to it. Now you can! Dolphin detects them perfectly fine so its not a drivers problem. I have tried reinstalling the drivers on Zadig, I have tried the latest version of Dolphin as well as the stable 5.0 version (Any stable versions before this did not work with my game). The primary analog stick is on the left with the d-pad located below and closer to the center. The controller order on the PC does not have to equal to GameCube controller port order. They release regular updates and feature step-by-step installation guides for every major platform that is supported (including … I launched Dolphin and went to "Controller Config" and it detected my adapter. Do you have a Wii U Gamecube controller adapter and want to use it on your PC? The driver that I installed with it was WinUSB (v6.1.7600.16385). I have read Cammelspit's guide, but I am running into an issue. What makes this controller so intriguing for use on Dolphin is the fact that the two analog triggers both have the same dual stage click at the end of travel exactly like the GameCube. If the controller is not showing up on their side, then it's an issue with the client and Parsec has no controller to find in the first place. I used the latest version of Zadig to install the correct drivers which would allow the adapter to be compatible with Dolphin. I tried it before, and it worked fine, but now it isn't working. (Free 2Day Shipping!) I don't have to download zadig, just plug the adapter in, set it to pc, and manually input the buttons as you would with a normal USB controller? For Port 1, in the dropdown menu, select GameCube Adapter For Wii U and to verify that it works, click configure and make sure Direct Connect is selected and the adapter is detected: (Quick Note: If you want rumble on and are using the Mayflash 4 port adapter, then you have to plug in BOTH USBs. Ask Question Asked 6 years, 5 months ago. If you aren't sure which one to pick, use Zadig. Hey everyone, I have been using the steam controller since April 2017, but I have only just begun attempting to use emulators at all. I am running dolphin on version 5.0 and it is able to detect the adapter but does not seem to receive any inputs from the controller. When I set to Port 1 as "GameCube Adapter for Wii U" and then click Configure, it says the adapter is detected. Dolphin’s Official GameCube Controller Adapter for Wii U has far the most stable driver build. If you previously replaced the drivers of the adapter in Zadig while the adapter was switched to PC, you will have to delete the installed drivers to revert them back to the original before you can get this to work. So then I launch SSBM with my controller attached to see if the inputs would work, and I got nothing.